More Alarms

Support for alarms has been around for quite a while and is in heavy use by some. More recently I got asked how to define an alarm that should be triggered 30s after the FCs (First Crack start) event.

FZ-94 (4) – Taking Control

Now that Artisan can talk to the drive controllers, it is not only possible to read the drive speeds, but also to control the drive speeds. However, that needs some further configuration changes on the drive controllers as well as some additional setup on the Artisan side.

FZ-94 (3) – Connecting the Drives

The FZ-94 comes with two Delta VFD-L drive controllers often referred to as frequency drives. One controls the drum speed, the other the air flow via the fan speed. Both are operated manually via a dial. While Artisan can log roasts automatically by reading the three temperature values from the machine via its RS485/MODBUS connection, the drum speed and air flow, both of which have a considerable influence on the resulting roast, have to be manually marked via some user defined buttons or sliders.

Videos: Curve Controlled Roasts with FZ-94 and Artisan

See also: http://kostverlorenvaart.blogspot.nl/2016/08/complete-curve-controlled-coffee-roast.html

The video below may be a little boring for some because I did not cut footage from it to skip any part that may be uneventful. Do slide back and forth at will to see / ignore any part you want.

FZ-94 (2) – Pushing the Drum Heat Limit Controller

That third MaxWell MTA-48 temperature PID, all the way to the right on the front of the FZ-94, plays a dual role. Besides reporting the actual temperature of the roasting drum, it is wired to control the heaters based on the set temperature limit.

FZ-94 (1) – Bumping up MODBUS

In this first post on an improved FZ-94 setup for Artisan v1.0 we are focusing on the communication between the machine and the software. MODBUS RTU speed in Artisan prior to v1.0 was limited by an issue in an underlying library. That resulted in each request/replay pair to take at least the amount specified by the serial timeout parameter, which defaults to one second.

FZ-94 (0) – Playing with the CTE Lab Roaster

Some new features in Artisan v1.0 open up advanced possibilities to log and control the Coffee Tech Engineering's Lab Roaster  FZ-94. This series of posts describe an improved setup that supersedes the one documented in an earlier post.

First successful curve controlled FZ-94 roast with Artisan

(See also: my previous blog)

Roastmasters working with a PID like the Fuji PXG4 could in the past already enjoy the "autopilot" feature of Artisan, making sure the roast profile neatly coasted along the curve saved from a previous roast.

Now, Artisan has its own internal software PID and if you can link it to a device that influences your Bean Temperature (BT), you could use this option to automatically correct the live roast curve to develop along the curve you have as your current ideal.